202405-1 Manufactured by Walker Power Systems Inc - Order Online

Part Number: 202405-1

Alternate P/N: 2024051

Manufacturer: walker power systems inc

NSN: 5340-01-406-7419

Item Name : clamp block

CAGE Code: 51913

FSC: 5340 Hardware Commercial

INC Code: 37415

Country: USA

NCB Code: 01

FSG: 53 Hardware and Abrasives

The NSN Part 202405-1 Clamp Block is ready-to-ship today! Please request a quote by filling out the form. All fields are important. The NSN number for 202405-1 is 5340-01-406-7419. The manufacturer of this part is Walker Power Systems Inc. A dedicated customer service executive will contact you within 15 minutes of receiving the RFQ.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 202405-1

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/ . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

NSN Information for Part Number 202405-1 with NSN 5340-01-406-7419, 5340014067419

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5340-01-406-7419 Item PartTypeName: CLAMP,BLOCK	5340	014067419	0	P
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
202405-1	5	2	3

Characteristics Data of NSN 5340-01-406-7419, 5340014067419

MRC	Criteria	Characteristic
ABHP	OVERALL LENGTH	1.500 INCHES NOMINAL
ABKW	OVERALL HEIGHT	0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM
ABMK	OVERALL WIDTH	0.500 INCHES NOMINAL
ABTB	MOUNTING HOLE DIAMETER	0.204 INCHES MINIMUM AND 0.218 INCHES MAXIMUM
ABTJ	MOUNTING HOLE QUANTITY	2
AFEC	DISTANCE FROM CENTER OF MOUNTING HOLE TO EDGE ALONG THE WIDTH	0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
AZGM	MOUNTING FACILITY	UNTHREADED HOLE
BYGG	BLOCK HEIGHT	0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
CWTD	CLAMPING HOLE QUANTITY	1
CWWM	CLAMPING HOLE DIAMETER	0.250 INCHES NOMINAL SINGLE HOLE
CWXC	DISTANCE FROM END TO FIRST MOUNTING HOLE CENTER	0.493 INCHES MINIMUM AND 0.513 INCHES MAXIMUM
CWXN	DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER	0.218 INCHES MINIMUM AND 0.238 INCHES MAXIMUM
FEAT	SPECIAL FEATURES	HOLES ON BOTTOM PORTION THREADED 10-32 UNF 2B
MATT	MATERIAL	ALUMINUM ALLOY 6061
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-200/8 T6 FED SPEC SINGLE MATERIAL RESPONSE
SFTT	SURFACE TREATMENT	CHROMATE
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-C-5541 CL 3 MIL SPEC SINGLE TREATMENT RESPONSE
STYL	STYLE DESIGNATOR	RECTANGULAR