HL220-8-14 Manufactured by Sps Technologies Ltd - Order Online

Part Number:  HL220-8-14
Alternate P/N:  HL220814
Manufacturer:  sps technologies ltd
Item Name :  pin rivet
CAGE Code:  56878
FSC:  5320 Rivets
INC Code:  67165
Country:  USA
NCB Code:  01
FSG:  53 Hardware and Abrasives
The NSN Part HL220-8-14 Pin Rivet is ready-to-ship today! Please request a quote by filling out the form. All fields are important. The NSN number for HL220-8-14 is 5320-01-165-3407. The manufacturer of this part is Sps Technologies Ltd. A dedicated customer service executive will contact you within 15 minutes of receiving the RFQ.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for HL220-8-14

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/ . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

NSN Information for Part Number HL220-8-14 with NSN 5320-01-165-3407, 5320011653407

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5320-01-165-3407

Item PartTypeName:

PIN-RIVET

53200116534070N
CIICHCCESDPMICCriticalityENAC
UA
Part NumberISCRNVCRNCCHCCMSDSSADC
AIC-L-806Y8-14525

Characteristics Data of NSN 5320-01-165-3407, 5320011653407

MRCCriteriaCharacteristic
AAJDTHREAD CLASS3A
AAJFTHREAD DIRECTIONRIGHT-HAND
AASBFASTENER LENGTH1.260 INCHES MINIMUM AND 1.280 INCHES MAXIMUM
AASKHEAD STYLEERR-090
AASUHEAD HEIGHT0.077 INCHES MINIMUM AND 0.090 INCHES MAXIMUM
AATBWIDTH BETWEEN FLATS0.0947 INCHES MINIMUM AND 0.0967 INCHES MAXIMUM
AAZESHANK DIAMETER0.2797 INCHES MINIMUM AND 0.2807 INCHES MAXIMUM
AAZFSHANK STYLEPIN-RIVET,STRAIGHT,THREADED
AAZGHEAD MAJOR DIAMETER0.435 INCHES MINIMUM AND 0.460 INCHES MAXIMUM
ABAJLUBRICATIONCETYL ALCOHOL,SPEC 305,HI-SHEAR CORP
ANEEGRIP LENGTH0.880 INCHES MAXIMUM
CMLPTHREAD QUANTITY PER INCH28
CQBCMINIMUM TENSILE STRENGTH160000 POUNDS PER SQUARE INCH
CQJXNOMINAL THREAD SIZE0.250 INCHES
CQSXSHEAR STRENGTH95000 SINGLE POUNDS PER SQUARE INCH
MATTMATERIALSTEEL COMP E4340 OVERALL OR STEEL COMP 4140 OVERALL OR STEEL COMP 8740 OVERALL
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-5626 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE OVERALL
SFTTSURFACE TREATMENTCHROMATE OVERALL AND CADMIUM OVERALL
STDCSURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416 TYPE 2 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THSDTHREAD SERIES DESIGNATORUNJF

bottom to top