HL19-5-5 Manufactured by Sps Technologies Ltd - Order Online

Part Number:  HL19-5-5
Alternate P/N:  HL1955
Manufacturer:  sps technologies ltd
Item Name :  pin rivet
CAGE Code:  06725
FSC:  5320 Rivets
INC Code:  67165
Country:  USA
NCB Code:  00
FSG:  53 Hardware and Abrasives
The NSN Part HL19-5-5 Pin Rivet is ready-to-ship today! Please request a quote by filling out the form. All fields are important. The NSN number for HL19-5-5 is 5320-00-421-0108. The manufacturer of this part is Sps Technologies Ltd. A dedicated customer service executive will contact you within 15 minutes of receiving the RFQ.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for HL19-5-5

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/ . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

NSN Information for Part Number HL19-5-5 with NSN 5320-00-421-0108, 5320004210108

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5320-00-421-0108

Item PartTypeName:

PIN-RIVET

53200042101080N
CIICHCCESDPMICCriticalityENAC
UA0
Part NumberISCRNVCRNCCHCCMSDSSADC
R2232P5-5595

Characteristics Data of NSN 5320-00-421-0108, 5320004210108

MRCCriteriaCharacteristic
AAJDTHREAD CLASS3A
AAJFTHREAD DIRECTIONRIGHT-HAND
AASBFASTENER LENGTH0.619 INCHES MINIMUM AND 0.639 INCHES MAXIMUM
AASKHEAD STYLEFLUSH COUNTERSUNK
AATBWIDTH BETWEEN FLATS0.078 INCHES NOMINAL
AAZESHANK DIAMETER0.163 INCHES MINIMUM AND 0.164 INCHES MAXIMUM
AAZFSHANK STYLEPIN-RIVET,STRAIGHT,THREADED
AAZGHEAD MAJOR DIAMETER0.256 INCHES MINIMUM AND 0.261 INCHES MAXIMUM
ANEEGRIP LENGTH0.307 INCHES MINIMUM AND 0.317 INCHES MAXIMUM
CMLPTHREAD QUANTITY PER INCH32
CQJXNOMINAL THREAD SIZE0.164 INCHES
CQSXSHEAR STRENGTH95000 SINGLE POUNDS PER SQUARE INCH
CRSQCOUNTERSINK ANGLE100.0 DEGREES NOMINAL
MATTMATERIALSTEEL COMP 4130 OR STEEL COMP 8740 OR STEEL COMP 4140 OVERALL
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-6758 FED SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 FED SPEC 2ND MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC 3RD MATERIAL RESPONSE OVERALL
SFTTSURFACE TREATMENTCADMIUM OVERALL
STDCSURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY1,CL3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THSDTHREAD SERIES DESIGNATORUNC

bottom to top