MLA-10-50 Manufactured by Solartron Electronics Inc - Order Online

Part Number: MLA-10-50

Alternate P/N: MLA1050

Manufacturer: solartron electronics inc

NSN: 6625-00-542-0606

Item Name : shunt instrument

CAGE Code: 65092

FSC: 6625 Electrical And Electronic Properties Measuring And Testing Instruments

INC Code: 00122

Country: USA

NCB Code: 00

FSG: 66 Instruments and Laboratory Equipment

The NSN Part MLA-10-50 Shunt Instrument is ready-to-ship today! Please request a quote by filling out the form. All fields are important. The NSN number for MLA-10-50 is 6625-00-542-0606. The manufacturer of this part is Solartron Electronics Inc. A dedicated customer service executive will contact you within 15 minutes of receiving the RFQ.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for MLA-10-50

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/ . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Characteristics Data of NSN 6625-00-542-0606, 6625005420606

MRC	Criteria	Characteristic
MRC	Decoded Requirement	Clear Text Reply
APPN	Accuracy In Percent	-0.25/+0.25 ALL RANGES
AXGY	Mounting Method	UNTHREADED HOLE
ABMK	Overall Width	1.220 INCHES MINIMUM AND 1.280 INCHES MAXIMUM
ZZZV	Fsc Application Data	TEST SET,ELECT. EQUIP.
ABHP	Overall Length	1.970 INCHES MINIMUM AND 2.030 INCHES MAXIMUM
AQCW	Element Material	COPPER-MANGANESE-NICKEL ALLOY
FEAT	Special Features	CRITICAL APPLICATIONS: IMPROVED PLATOON COMMAND POST,HAWK (E1165) (AN/GSA-132); INFO COORDINATION CENTRAL,HAWK (E0725) (AN/TPX-46 AN/MSQ-111); NUCLEAR REACTORS PROGRAM; MISSILE,MI PEACEKEEPER; ACFT,F-111; ACFT,THUNDERBOLT II,A-10; COBRA DAN SYS,FPS-108; MISSILE,HAWK MIM-23; BRADLEY FIGHTING VEHICLE SYSTEM; OVER THE HORIZON BACK SCANNER (OTH-B) PROGRAM (AN/FPS-118); DEEP SUBMERGENCE SYSTEMS PROGRAMS; COUNTER MEASURE SET,AN/SLQ-17
ABDS	Mounting Provision Quantity	2
CRCT	Current Rating And Type	10.0 AMPERES NOMINAL DC
CRCM	Voltage Drop In Millivolts	50.0 NOMINAL
ZZZK	Specification/Standard Data	58536-A-A-55524/1 GOVERNMENT SPECIFICATION
ALBY	Usage Design	EXTERNAL
CBME	Cubic Measure	4.464 CUBIC INCHES
AKYN	Furnished Items And Quantity	NUT 4; LOCKWASHER 4; SCREW 2
ABKW	Overall Height	1.658 INCHES MINIMUM AND 1.718 INCHES MAXIMUM
TTQY	Terminal Type And Quantity	2 THREADED STUD
AARG	Reliability Indicator	NOT ESTABLISHED
TEST	Test Data Document	58536-A-A-55524 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
CQTM	Terminal Location	TOP
ABKQ	Center To Center Distance Between Mounting Facilities Parallel To Length	0.844 INCHES MINIMUM AND 0.904 INCHES MAXIMUM
AEBV	Unthreaded Mounting Hole Diameter	0.190 INCHES MINIMUM AND 0.220 INCHES MAXIMUM