MS20392-2C57 Manufactured by Piper Aircraft Inc - Order Online

Part Number:  MS20392-2C57
Alternate P/N:  MS203922C57
Manufacturer:  piper aircraft inc
Item Name :  pin straight headed
CAGE Code:  77294
INC Code:  02384
Country:  USA
NCB Code:  00
FSG:  53 Hardware and Abrasives
The NSN Part MS20392-2C57 Pin Straight Headed is ready-to-ship today! Please request a quote by filling out the form. All fields are important. The NSN number for MS20392-2C57 is 5315-00-812-3752. The manufacturer of this part is Piper Aircraft Inc. A dedicated customer service executive will contact you within 15 minutes of receiving the RFQ.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for MS20392-2C57

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/ . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

NSN Information for Part Number MS20392-2C57 with NSN 5315-00-812-3752, 5315008123752

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5315-00-812-3752

Item PartTypeName:

PIN,STRAIGHT,HEADED

53150081237520N
CIICHCCESDPMICCriticalityENAC
UU
Part NumberISCRNVCRNCCHCCMSDSSADC
MS20392-2C57395

Characteristics Data of NSN 5315-00-812-3752, 5315008123752

MRCCriteriaCharacteristic
AASKHEAD STYLEPAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION)
AAZPCHAMFER LENGTH0.046 INCHES NOMINAL
ABMZDIAMETER0.184 INCHES MINIMUM AND 0.186 INCHES MAXIMUM
ABPBUNDER HEAD LENGTH1.897 INCHES MINIMUM AND 1.917 INCHES MAXIMUM
ABRBHOLE ARRANGEMENT STYLEONE END DRILLED
ABRCFIRST HOLE DIAMETER0.066 INCHES MINIMUM AND 0.086 INCHES MAXIMUM
ABREDISTANCE FROM CENTERLINE OF HOLE TO END OF PIN0.088 INCHES NOMINAL
CQFMHARDNESS RATING26.5 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
CQPJPIN CHAMFER ANGLE15.0 DEGREES NOMINAL
CQSXSHEAR STRENGTH4140 DOUBLE POUND
CRRGPIN HEAD DIAMETER0.312 INCHES NOMINAL
HGTHHEIGHT0.046 INCHES NOMINAL
MATTMATERIALSTEEL COMP 4037 OR STEEL COMP 4130 OR STEEL COMP 8630 OVERALL
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONAMS 6300 ASSN STD 1ST MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6050 MIL SPEC 3RD MATERIAL RESPONSE OVERALL
SFTTSURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
STYLSTYLE DESIGNATORSTRAIGHT
STDCSURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL

bottom to top