MIL-DTL-83798C Manufactured by Parker Hannifin Corp - Order Online

Part Number:  MIL-DTL-83798C
Alternate P/N:  MILDTL83798C
Manufacturer:  parker hannifin corp
Item Name :  connector swivel fl
CAGE Code:  98441
INC Code:  18280
Country:  USA
NCB Code:  00
FSG:  47 Pipe Tubing Hose and Fittings
The NSN Part MIL-DTL-83798C Connector Swivel Fl is ready-to-ship today! Please request a quote by filling out the form. All fields are important. The NSN number for MIL-DTL-83798C is 4730-00-891-0971. The manufacturer of this part is Parker Hannifin Corp. A dedicated customer service executive will contact you within 15 minutes of receiving the RFQ.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for MIL-DTL-83798C

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/ . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

NSN Information for Part Number MIL-DTL-83798C with NSN 4730-00-891-0971, 4730008910971

NSNFSCNIINCLSHazmatDEMILCancelled NSN
4730-00-891-0971

Item PartTypeName:

CONNECTOR,SWIVEL FLANGE TO HOSE

47300089109710N
CIICHCCESDPMICCriticalityENAC
UA
Part NumberISCRNVCRNCCHCCMSDSSADC
136-3000-24D695

Characteristics Data of NSN 4730-00-891-0971, 4730008910971

MRCCriteriaCharacteristic
AECSBOLT HOLE QUANTITY4 1ST END
AEHZMAXIMUM OPERATING TEMP121.0 DEG CELSIUS SINGLE RESPONSE
AHNCCONNECTION STYLEGRIPPING NIPPLE (NOSE) 2ND END
AKGFNOMINAL WIDTH2.375 INCHES 1ST END
AKGGNOMINAL LENGTH2.375 INCHES 1ST END
ARKNFLANGE SHAPERECTANGULAR WITH HOLES 1ST END
AWLSCONNECTION TYPEFLANGE 1ST END
AWLSCONNECTION TYPETHREADED EXTERNAL HOSE GRIPPING 2ND END
CQGMMAXIMUM OPERATING PRESSURE250.0 POUNDS PER SQUARE INCH SINGLE RESPONSE
CWCKNOMINAL THICKNESS0.297 INCHES 1ST END
CWCQBOLT HOLE NOMINAL DIAMETER0.266 INCHES 1ST END
CWCYCENTER TO CENTER NOMINAL DISTANCE BETWEEN BOLT HOLES ALONG LENGTH1.812 INCHES 1ST END
CWDCCENTER TO CENTER NOMINAL DISTANCE BETWEEN BOLT HOLES ALONG WIDTH1.812 INCHES 1ST END
CWDFFLANGE FACE DESIGNRAISED SWIVEL 1ST END
CWDHRAISED FACE NOMINAL HEIGHT0.020 INCHES 1ST END
CWDLRAISED FACE NOMINAL DIAMETER2.125 INCHES 1ST END
CWDWNOMINAL INSIDE DIAMETER HOSE ACCOMMODATED1.375 INCHES 2ND END
CWDZNOMINAL OUTSIDE DIAMETER HOSE ACCOMMODATED1.672 INCHES 2ND END
CWFRNOMINAL OVERALL LENGTH2.594 INCHES
FEATSPECIAL FEATURESGRUMMAN AEROSPACE CORP A10 AIRCRAFT
MATTMATERIALALUMINUM ALLOY OVERALL
SFTTSURFACE TREATMENTANODIZE INSIDE
SFTTSURFACE TREATMENTANODIZE OUTSIDE
STDCSURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625,TY 2 MIL SPEC SINGLE TREATMENT RESPONSE INSIDE
STDCSURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625,TYPE 2 MIL SPEC SINGLE TREATMENT RESPONSE OUTSIDE
TMQYFURNISHED ITEMS AND QUANTITY1 HOSE COUPLING NUT

bottom to top