M1500-U1 Manufactured by Morey Machinery Mfg Corp - Order Online

Part Number: M1500-U1

Alternate P/N: M1500U1

Manufacturer: morey machinery mfg corp

NSN: 3417-01-208-1739

Item Name : milling machine hor

CAGE Code: 41425

FSC: 3417 Milling Machines

Country: USA

NCB Code: 01

FSG: 34 Metalworking Machinery

The NSN Part M1500-U1 Milling Machine Hor is ready-to-ship today! Please request a quote by filling out the form. All fields are important. The NSN number for M1500-U1 is 3417-01-208-1739. The manufacturer of this part is Morey Machinery Mfg Corp. A dedicated customer service executive will contact you within 15 minutes of receiving the RFQ.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for M1500-U1

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/ . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Characteristics Data of NSN 3417-01-208-1739, 3417012081739

MRC	Criteria	Characteristic
ELEC	Voltage In Volts	220.0 AND 440.0
ATJK	Power Source	ELECTRIC MOTOR
ACDC	Current Type	AC
FREQ	Frequency In Hertz	60
BTZC	Table Vertical Travel	17.700 INCHES NOMINAL
FAAZ	Phase	THREE
BNBF	Table Cross Travel	12.000 INCHES NOMINAL
AAXX	Mounting Type	FLOOR
BNBD	Table Longitudinal Travel	35.400 INCHES NOMINAL
AKYN	Furnished Items And Quantity	1 4.5 HP FEED MOTOR; 1 MECHANICAL COOLANT SYSTEM; 1 SPLASH TRAY; 1 SET OF MANUALS; 2 HORIZONTAL AROBR SUPPORTS; 1 SET OF SPANNERS; 1 CUTTER GUARD
AQDD	Feed Type	POWER
MRC	Decoded Requirement	Clear Text Reply
BTZD	Table Swivel Direction And Adjustment In Deg	45.0 EACH SIDE
BTZS	Electric Motor Radio Interference Suppression	NOT INCLUDED
NMBR	Quantity	2
BTZJ	Maximum Distance From Spindle Center To Table Top	17.700 INCHES
FEAT	Special Features	FOUR 0.866 IN. T-SLOTS AT 3.150 IN. CENTERS; SPINDLE NOSE DIAMETER 5.062 IN.; SPINDLE INTERNAL TAPER NO. 50 AMERICAN STANDARD; NO. OF SPINDLE SPEEDS IN EITHER DIRECTION 18; LOW SPINDLE SPEED RANGE 18 RPM TO 1062 RPM,HIGH SPINDLE SPEED RANGE 27 RPM TO 1565 RPM; INFINITELY VARIABLE LONGITUDINAL AND CROSS FEED RANGE 0.75 IN. PER MINUTE TO 72.0 IN. PER MINUTE,INFINITELY VARIABLE VERTICAL FEED RANGE 0.25 IN. PER MINUTE TO 16.0 IN. PER MINUTE; RAPID TRAVERSE LON GITUDINAL AND CROSS FEED RANGE 120 IN. PER MINUTE,RAPID TRAVERSE VERTICAL FEED RANGE 35 IN. PER MINUTE; FLOOR SPACE 107 IN. BY 106 IN.; NET WEIGHT 10299 POUNDS; GROSS WEIGHT 11200 POUNDS; SHIPPING SIZES 87 IN. BY 114 IN. BY 108 IN.
BTZM	Electric Motor Fungus Resistant Feature	PROVIDED
ASHK	Electric Motor Horsepower Rating	10