11070390-4 Manufactured by Lockheed Martin Corp Electronics And Missiles Div - Order Online

Part Number: 11070390-4

Alternate P/N: 110703904

Manufacturer: lockheed martin corp electronics and missiles div

NSN: 5970-00-512-0876

Item Name : insulation sleeving

CAGE Code: 09205

FSC: 5970 Electrical Insulators and Insulating Materials

INC Code: 61626

Country: USA

NCB Code: 00

FSG: 59 Electrical and Electronic Equipment Components

The NSN Part 11070390-4 Insulation Sleeving is ready-to-ship today! Please request a quote by filling out the form. All fields are important. The NSN number for 11070390-4 is 5970-00-512-0876. The manufacturer of this part is Lockheed Martin Corp Electronics And Missiles Div. A dedicated customer service executive will contact you within 15 minutes of receiving the RFQ.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 11070390-4

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/ . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

NSN Information for Part Number 11070390-4 with NSN 5970-00-512-0876, 5970005120876

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5970-00-512-0876 Item PartTypeName: INSULATION SLEEVING,ELECTRICAL,S	5970	005120876	0	P
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
228A042-5-00	6	2	5

Characteristics Data of NSN 5970-00-512-0876, 5970005120876

MRC	Criteria	Characteristic
AARG	RELIABILITY INDICATOR	NOT ESTABLISHED
ABJH	TEMP RATING	-55.0 DEG CELSIUS
ADZC	ENVIRONMENTAL PROTECTION	FLAME RESISTANT AND MILDEW RESISTANT AND SOLVENT RESISTANT AND WATER RESISTANT
AFZP	LARGE END WALL THICKNESS OF MAIN BODY	0.110 INCHES MAXIMUM AS SUPPLIED
AFZP	LARGE END WALL THICKNESS OF MAIN BODY	0.110 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY
AFZQ	SMALL END WALL THICKNESS OF MAIN BODY	0.040 INCHES MAXIMUM AS SUPPLIED
AFZQ	SMALL END WALL THICKNESS OF MAIN BODY	0.040 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY
AFZR	DISTANCE FROM INTERSECTING CENTERLINES TO EDGE OF SMALL END	1.540 INCHES MAXIMUM AS SUPPLIED
AFZR	DISTANCE FROM INTERSECTING CENTERLINES TO EDGE OF SMALL END	1.560 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY
AFZS	DISTANCE FROM CENTERLINE OF SMALL END TO EDGE OF LARGE END	0.860 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY
AGAJ	MAIN BODY SMALL END INSIDE DIAMETER	0.220 INCHES MAXIMUM AFTER UNRESTRICTED RECOVERY
AGAJ	MAIN BODY SMALL END INSIDE DIAMETER	0.460 INCHES MINIMUM AS SUPPLIED
AGAK	MAIN BODY LARGE END INSIDE DIAMETER	0.700 INCHES MAXIMUM AFTER UNRESTRICTED RECOVERY
AGAK	MAIN BODY LARGE END INSIDE DIAMETER	0.940 INCHES MINIMUM AS SUPPLIED
AGAM	DISTANCE FROM TOP OF SHOULDER TO SMALL END OF MAIN BODY	0.370 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY
AGAP	ANGLE BETWEEN LARGE END AND SMALL END CENTERLINES IN DEG	45.0 NOMINAL AS SUPPLIED
AGAP	ANGLE BETWEEN LARGE END AND SMALL END CENTERLINES IN DEG	90.0 NOMINAL AFTER UNRESTRICTED RECOVERY
CQBC	MINIMUM TENSILE STRENGTH	1500 POUNDS PER SQUARE INCH
FEAT	SPECIAL FEATURES	INCLUDES MOLDING PORTS
FLEX	FLEXIBILITY	FLEXIBLE
HGTH	HEIGHT	1.300 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY
HUES	COLOR	BLACK
MATT	MATERIAL	RUBBER,NEOPRENE,RT-501,RAYCHEM CORP
STYL	STYLE DESIGNATOR	BOOT-90 DEGREES
UKBG	DIELECTRIC MATERIAL VOLTAGE RATING PER UNIT THICKNESS	200.0 VOLTS PER MIL 0.001 INCH