47C531125P1 Manufactured by Lockheed Martin Corp Div Rotary And Mission Systems - Order Online

Part Number: 47C531125P1

Manufacturer: lockheed martin corp div rotary and mission systems

NSN: 5340-01-310-2388

Item Name : bracket double angl

CAGE Code: 23991

FSC: 5340 Hardware Commercial

INC Code: 20354

Country: USA

NCB Code: 01

FSG: 53 Hardware and Abrasives

The NSN Part 47C531125P1 Bracket Double Angl is ready-to-ship today! Please request a quote by filling out the form. All fields are important. The NSN number for 47C531125P1 is 5340-01-310-2388. The manufacturer of this part is Lockheed Martin Corp Div Rotary And Mission Systems. A dedicated customer service executive will contact you within 15 minutes of receiving the RFQ.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 47C531125P1

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/ . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

NSN Information for Part Number 47C531125P1 with NSN 5340-01-310-2388, 5340013102388

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5340-01-310-2388 Item PartTypeName: BRACKET,DOUBLE ANGLE	5340	013102388	0	P
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
47C531125P1	6	2	3

Characteristics Data of NSN 5340-01-310-2388, 5340013102388

MRC	Criteria	Characteristic
ADLK	FIRST LEG LENGTH	0.280 INCHES NOMINAL
AHLW	SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.100 INCHES NOMINAL
AHPX	SECOND LEG THICKNESS	0.020 INCHES NOMINAL
AHPZ	CENTER SECTION HEIGHT	0.180 INCHES NOMINAL
AKBU	SECOND LEG STYLE	SQUARE
MATT	MATERIAL	STEEL COMP 304
STYL	STYLE DESIGNATOR	ADJACENT ANGLES
ACHY	MOUNTING HOLE TYPE	PLAIN AND THREADED
AHQB	CENTER SECTION THICKNESS	0.020 INCHES NOMINAL
AHRA	FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	0.150 INCHES NOMINAL
CSSR	SECOND LEG ANGLE	90.0 DEGREES NOMINAL
ADLL	SECOND LEG LENGTH	0.280 INCHES NOMINAL
AHLK	FIRST LEG HOLE DIAMETER	0.112 INCHES NOMINAL
AHQN	FIRST LEG WIDTH	0.270 INCHES MINIMUM AND 0.330 INCHES MAXIMUM
AHRB	FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.100 INCHES NOMINAL
AKCU	SECOND LEG HOLE ARRANGEMENT STYLE	ONE HOLE
AHLF	SECOND LEG WIDTH	0.270 INCHES MINIMUM AND 0.330 INCHES MAXIMUM
AHLN	SECOND LEG HOLE DIAMETER	0.127 INCHES MINIMUM AND 0.133 INCHES MAXIMUM
AHLV	SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	0.150 INCHES NOMINAL
AHPW	FIRST LEG THICKNESS	0.020 INCHES NOMINAL
AHQA	CENTER SECTION WIDTH	0.270 INCHES MINIMUM AND 0.330 INCHES MAXIMUM
AJZU	FIRST LEG STYLE	SQUARE
AKAU	FIRST LEG HOLE ARRANGEMENT STYLE	ONE HOLE
CSSP	SECOND LEG RELATIONSHIP TO FIRST LEG	NOT IDENTICAL
CSSQ	FIRST LEG ANGLE	90.0 DEGREES NOMINAL
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	QQ-S-766 FED SPEC SINGLE MATERIAL RESPONSE