LT1761ES5-3.3 Manufactured by Linear Technologies Inc - Order Online

Part Number: LT1761ES5-3.3

Alternate P/N: LT1761ES53.3

Manufacturer: linear technologies inc

NSN: 5962-01-518-6787

Item Name : microcircuit linear

CAGE Code: 64155

FSC: 5962 Microcircuits Electronic

INC Code: 31778

Country: USA

NCB Code: 01

FSG: 59 Electrical and Electronic Equipment Components

The NSN Part LT1761ES5-3.3 Microcircuit Linear is ready-to-ship today! Please request a quote by filling out the form. All fields are important. The NSN number for LT1761ES5-3.3 is 5962-01-518-6787. The manufacturer of this part is Linear Technologies Inc. A dedicated customer service executive will contact you within 15 minutes of receiving the RFQ.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for LT1761ES5-3.3

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/ . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

NSN Information for Part Number LT1761ES5-3.3 with NSN 5962-01-518-6787, 5962015186787

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5962-01-518-6787 Item PartTypeName: MICROCIRCUIT,LINEAR	5962	015186787	0	N	B
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U		B	A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
356A1409	5	9	D

Characteristics Data of NSN 5962-01-518-6787, 5962015186787

MRC	Criteria	Characteristic
ADAQ	BODY LENGTH	2.800 INCHES MINIMUM AND 3.000 INCHES MAXIMUM"
ADAT	BODY WIDTH	1.500 INCHES MINIMUM AND 1.750 INCHES MAXIMUM"
ADAU	BODY HEIGHT	0.900 INCHES MINIMUM AND 1.300 INCHES MAXIMUM"
AFGA	OPERATING TEMP RANGE	-55.0/+125.0 DEG CELSIUS"
AGAV	END ITEM IDENTIFICATION	C-17A"
CBBL	FEATURES PROVIDED	ELECTROSTATIC SENSITIVE AND LOW NOISE AND LOW POWER AND SELECTED ITEM"
CQSJ	INCLOSURE MATERIAL	PLASTIC"
CQSZ	INCLOSURE CONFIGURATION	DUAL-IN-LINE"
CRTL	CRITICALITY CODE JUSTIFICATION	CBBL"
CSSL	DESIGN FUNCTION AND QUANTITY	1 REGULATOR, VOLTAGE, DC"
CTFT	CASE OUTLINE SOURCE AND DESIGNATOR	SOT23 JOINT ELECTRON DEVICE ENGINEERING COUNCIL"
CXCY	PART NAME ASSIGNED BY CONTROLLING AGENCY	MICROCIRCUIT, PLASTIC ENCAPSULATED (SURFACE MOUNT) PROCUREMENT AND SELECTION REQUIREMENTS (FOR REGULATOR)."
CZEN	VOLTAGE RATING AND TYPE PER CHARACTERISTIC	-20.0 VOLTS MINIMUM ABSOLUTE INPUT AND 20.0 VOLTS MAXIMUM ABSOLUTE INPUT AND -20.0 VOLTS MINIMUM INPUT/OUTPUT DIFFERENTIAL AND 3.3 VOLTS NOMINAL OUTPUT"
FEAT	SPECIAL FEATURES	LT1761 SERIES 100 MILLIAMP, LOW NOISE, LDO MICROPOWER REGULATORS IN SOT-23"
SPCL	SPECIAL TEST FEATURES	ULINEAR TECHNOLOGY P/N LT1761ES5-3.3 1OO PERCENT UPSCREENED PER PARA.3.1.1 OF DWG 89954-356A1407 BY APPROVED TEST FACILITY, PIKES PEAK TEST LABS, INC. OR SYPRIS TEST AND MEASUREMENT FOR OPERATION IN TEMPERATURES OF -55C TO +125C."
TEST	TEST DATA DOCUMENT	89954-356A1407 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRA"
TTQY	TERMINAL TYPE AND QUANTITY	5 GULLWING"
ADAQ	BODY LENGTH	2.800 INCHES MINIMUM AND 3.000 INCHES MAXIMUM"
ADAT	BODY WIDTH	1.500 INCHES MINIMUM AND 1.750 INCHES MAXIMUM"
ADAU	BODY HEIGHT	0.900 INCHES MINIMUM AND 1.300 INCHES MAXIMUM"
AFGA	OPERATING TEMP RANGE	-55.0/+125.0 DEG CELSIUS"
AGAV	END ITEM IDENTIFICATION	C-17A"
CBBL	FEATURES PROVIDED	ELECTROSTATIC SENSITIVE AND LOW NOISE AND LOW POWER AND SELECTED ITEM"
CQSJ	INCLOSURE MATERIAL	PLASTIC"
CQSZ	INCLOSURE CONFIGURATION	DUAL-IN-LINE"
CRTL	CRITICALITY CODE JUSTIFICATION	CBBL"
CSSL	DESIGN FUNCTION AND QUANTITY	1 REGULATOR, VOLTAGE, DC"
CTFT	CASE OUTLINE SOURCE AND DESIGNATOR	SOT23 JOINT ELECTRON DEVICE ENGINEERING COUNCIL"
CXCY	PART NAME ASSIGNED BY CONTROLLING AGENCY	MICROCIRCUIT, PLASTIC ENCAPSULATED (SURFACE MOUNT) PROCUREMENT AND SELECTION REQUIREMENTS (FOR REGULATOR)."
CZEN	VOLTAGE RATING AND TYPE PER CHARACTERISTIC	-20.0 VOLTS MINIMUM ABSOLUTE INPUT AND 20.0 VOLTS MAXIMUM ABSOLUTE INPUT AND -20.0 VOLTS MINIMUM INPUT/OUTPUT DIFFERENTIAL AND 3.3 VOLTS NOMINAL OUTPUT"
FEAT	SPECIAL FEATURES	LT1761 SERIES 100 MILLIAMP, LOW NOISE, LDO MICROPOWER REGULATORS IN SOT-23"
SPCL	SPECIAL TEST FEATURES	ULINEAR TECHNOLOGY P/N LT1761ES5-3.3 1OO PERCENT UPSCREENED PER PARA.3.1.1 OF DWG 89954-356A1407 BY APPROVED TEST FACILITY, PIKES PEAK TEST LABS, INC. OR SYPRIS TEST AND MEASUREMENT FOR OPERATION IN TEMPERATURES OF -55C TO +125C."
TEST	TEST DATA DOCUMENT	89954-356A1407 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRA"
TTQY	TERMINAL TYPE AND QUANTITY	5 GULLWING"