SS04023070-10 Manufactured by J And P Khamken Industries Inc - Order Online

Part Number: SS04023070-10

Alternate P/N: SS0402307010

Manufacturer: j and p khamken industries inc

NSN: 5120-01-363-9304

Item Name : spanner attachment

CAGE Code: 3L5M5

FSC: 5120 Hand Tools Nonedged Nonpowered

INC Code: 33471

Country: USA

NCB Code: 01

FSG: 51 Hand Tools

The NSN Part SS04023070-10 Spanner Attachment is ready-to-ship today! Please request a quote by filling out the form. All fields are important. The NSN number for SS04023070-10 is 5120-01-363-9304. The manufacturer of this part is J And P Khamken Industries Inc. A dedicated customer service executive will contact you within 15 minutes of receiving the RFQ.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for SS04023070-10

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/ . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Characteristics Data of NSN 5120-01-363-9304, 5120013639304

MRC	Criteria	Characteristic
SUPP	Supplementary Features	THE WRENCH POINT OF TOOL IS FORMED BY REMOVING 0.13 INCH FROM TOP OF ONE UPRIGHT; MATERIAL IS REMOVED FROM UPRIGHT FOR WRENCH POINT BY MAKING A HEXCUT MEASURING 0.139 P/M 0.003 INCH; HEX WRENCH POINT CENTERLINE TO BE ON ORIGINAL CENTERLINE OF STOCK; A 1/4 INCH POWER DRIVER 0.75 INCH LONG IS WELDED TO REMAINING UPRIGHT; CENTERLINE OF HEX DRIVER TO BE ON CENTERLINE OF WRENCHPOINT; OVERALL LENGTH OF TOOL TO BE 2.75 INCHES
CQFM	Hardness Rating	45.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM
ATNC	Drive Surface Size	0.250 INCHES NOMINAL SINGLE END
MRC	Decoded Requirement	Clear Text Reply
FTLD	Functional Description	THE WRENCH IS FABRICATED FROM A 2.0 INCH LENGTH OF 0.5 INCH DIA STEEL STOCK; THE TOOL IS INITIALLY FORMED BY TAKING A CENTERED FLAT CUT 0.422 DEEP BY 1.5 INCH LONG MEASURED FROM LENGTH WISE CENTER OF STOCK; THIS LEAVES AN UPRIGHT MEASURING OF 0.25 WIDE BY 0.422INCH HIGH AT EACH END
SFTT	Surface Treatment	NICKEL OVERALL
MATT	Material	STEEL OVERALL
AGAV	End Item Identification	AIM-120A