SR1030-100K Manufactured by Iet Labs Inc - Order Online

Part Number: SR1030-100K

Alternate P/N: SR1030100K

Manufacturer: iet labs inc

NSN: 6625-01-318-0984

Item Name : resistance standard

CAGE Code: 62015

FSC: 6625 Electrical And Electronic Properties Measuring And Testing Instruments

INC Code: 04897

Country: USA

NCB Code: 01

FSG: 66 Instruments and Laboratory Equipment

The NSN Part SR1030-100K Resistance Standard is ready-to-ship today! Please request a quote by filling out the form. All fields are important. The NSN number for SR1030-100K is 6625-01-318-0984. The manufacturer of this part is Iet Labs Inc. A dedicated customer service executive will contact you within 15 minutes of receiving the RFQ.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for SR1030-100K

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/ . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Characteristics Data of NSN 6625-01-318-0984, 6625013180984

MRC	Criteria	Characteristic
SR-5	MANUFACTURERS CODE	62015
AARB	TERMINAL TYPE	JACK TOP BINDING POST
AGAV	III END ITEM IDENTIFICATION	PHASE ANGLE STANDARD,P/N 5000
ABHP	OVERALL LENGTH	13.200 INCHES NOMINAL
SR-5	DESIGN CONTROL REFERENCE	SR1030-100K
AWJN	III UNPACKAGED UNIT WEIGHT	14.000 POUNDS
AAPP	ELECTRICAL RESISTANCE	100.0 KILOHMS
ABMK	OVERALL WIDTH	4.700 INCHES NOMINAL
AARA	TERMINAL QUANTITY	28
FEAT	SPECIAL FEATURES	ONE RESISTOR ALONE: MAX I 3.16 MA,316 V; 10 RESISTORS IN PARALLEL (R/10) MAX I 22.3 MA,223 V; 10 RESISTORS IN SERIES (R10) MAX I 1.5 MA,1500 V; LEAKAGE RESISTANCE: 1 OHM TO 10 KOHM 10 TO THE 12TH OHM,TERMINAL TO CASE; 100 KILOHM: 10 TO THE 13TH OHM,TERMINAL TO CASE; OIL BATH: MINERAL OIL,USP LIGHT PENCO,SONTEX 85,WHITE,5 GAL; OPER TEMP: 22.8 PORM 3.3 DEG. C; HUMIDITY: 20-50 PCT; C/O A RESISTANCE BOX CONTAINING 12 NOMINALLY EQUAL PRECISIONRESISTORS
ALFK	CASE	NOT PROVIDED
ABKW	OVERALL HEIGHT	4.600 INCHES NOMINAL
SR-5	THE MANUFACTURERS DATA
BDHN	TERMINAL LOCATION CONFIGURATION	LOCATED ON TOP IN OFFSET ROWS OF TWO APPROX CENTERED