Note : We Will Not Share Your Information To Any Third Parties.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-459-5499 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,PRE | 5905 | 004595499 | 0 | N | B | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | B | U | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 804541 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 5 |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | 0.9995 INCHES NOMINAL |
| AAVM | PILOT LENGTH | 0.0620 INCHES NOMINAL |
| ABPA | UNDERCUT DIAMETER | 1.880 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.0620 INCHES MINIMUM |
| ABPM | BODY DIAMETER | 2.030 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.250 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 0.850 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 2.840 INCHES MAXIMUM |
| AECZ | MOUNTING LIP DIAMETER | 2.0000 INCHES NOMINAL |
| AEDA | MOUNTING LIP DEPTH | 0.0620 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 312.19 NOMINAL |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AXGY | MOUNTING METHOD | CLAMP RING |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 64.85 KILOHMS 1ST SECTION AND 15.0 KILOHMS 2ND SECTION AND 25.0 KILOHMS 3RD SECTION AND 25.0 KILOHMS 4TH SECTION AND 1.0 KILOHMS 5TH SECTION |
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 175.0 1ST SECTION AND 175.0 3RD SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.10 TO 0.10 1ST SECTION AND-0.20 TO 0.20 2ND SECTION AND-0.10 TO 0.10 3RD SECTION AND-0.20 TO 0.20 4TH SECTION AND-0.10 TO 0.10 5TH SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.5 FREE AIR 1ST SECTION AND 0.1 FREE AIR 2ND SECTION AND 0.2 FREE AIR 3RD SECTION AND 0.67 FREE AIR 4TH SECTION AND 1.0 FREE AIR 5TH SECTION |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS ABSOLUTE CONFORMITY |
| CRJS | FIXED TAP QUANTITY PER SECTION | 1 1ST SECTION AND 1 1ST SECTION1 3RD SECTION |
| CRJS | FIXED TAP QUANTITY PER SECTION | 1 1ST SECTION AND 1 3RD SECTION |
| CRJS | FIXED TAP QUANTITY PER SECTION | 1 3RD SECTION |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | -0.1 TO 0.1 DEG ANGULAR ROTATION 1ST SECTION AND-0.1 TO 0.1 DEG ANGULAR ROTATION 3RD SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -1.0 TO 1.0 5TH SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 1ST SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 1ST SECTION AND-5.0 TO 5.0 2ND SECTION AND-5.0 TO 5.0 3RD SECTION AND-5.0 TO 5.0 4TH SECTION AND-1.0 TO 1.0 5TH SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 2ND SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 3RD SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 4TH SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS TABLE |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 121.0 ALL SECTIONS |
| TEST | TEST DATA DOCUMENT | 70210-805353 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWI |
| TTQY | TERMINAL TYPE AND QUANTITY | 17 TURRET |
|
Guaranteed on-time |
|
|
Customized and |
|
|
Over 5100 |
|
|
Complete Purchasing |
