283HA-08 Manufactured by Dynacon Inc - Order Online

Part Number: 283HA-08

Alternate P/N: 283HA08

Manufacturer: dynacon inc

NSN: 4720-01-390-8096

Item Name : hose assembly nonme

CAGE Code: 0FSD0

FSC: 4720 Hose and Flexible Tubing

INC Code: 20311

Country: USA

NCB Code: 01

FSG: 47 Pipe Tubing Hose and Fittings

The NSN Part 283HA-08 Hose Assembly Nonme is ready-to-ship today! Please request a quote by filling out the form. All fields are important. The NSN number for 283HA-08 is 4720-01-390-8096. The manufacturer of this part is Dynacon Inc. A dedicated customer service executive will contact you within 15 minutes of receiving the RFQ.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 283HA-08

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/ . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

NSN Information for Part Number 283HA-08 with NSN 4720-01-390-8096, 4720013908096

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
4720-01-390-8096 Item PartTypeName: HOSE ASSEMBLY,NONMETALLIC	4720	013908096	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
12HT6BW12FH12FJ-29.000	2	9	5

Characteristics Data of NSN 4720-01-390-8096, 4720013908096

MRC	Criteria	Characteristic
AAGR	CROSS-SECTIONAL SHAPE STYLE	ROUND"
AAJD	THREAD CLASS	2B 1ST END"
AAJF	THREAD DIRECTION	RIGHT-HAND 1ST END"
AARX	INSIDE DIAMETER	0.750 INCHES NOMINAL"
ABJH	TEMP RATING	-40.0 DEG FAHRENHEIT AND 250.0 DEG FAHRENHEIT SINGLE RESPONSE"
ABKV	OUTSIDE DIAMETER	1.325 INCHES NOMINAL"
ACKH	MINIMUM INSIDE BENDING RADIUS	9.500 INCHES"
AHNC	CONNECTION STYLE	SWIVEL NUT FLARE 1ST END"
AKUU	END CONNECTION DESIGN	STRAIGHT 1ST END"
AKXL	END FITTING COMPONENT AND MATERIAL	COMPLETE FITTING STEEL ALL ENDS"
AWLS	CONNECTION TYPE	THREADED INTERNAL TUBE 1ST END"
CMLP	THREAD QUANTITY PER INCH	12 1ST END"
CQBD	BURST TEST PRESSURE	24000.0 POUNDS PER SQUARE INCH"
CQCS	LAYER COMPOSITION AND LOCATION	1ST LAYER BRAIDED STEEL WIRE"
CQCS	LAYER COMPOSITION AND LOCATION	2ND LAYER BRAIDED STEEL WIRE"
CQCS	LAYER COMPOSITION AND LOCATION	3RD LAYER BRAIDED STEEL WIRE"
CQCS	LAYER COMPOSITION AND LOCATION	4TH LAYER BRAIDED STEEL WIRE"
CQCS	LAYER COMPOSITION AND LOCATION	OUTER LAYER MOLDED RUBBER, SYNTHETIC"
CQGM	MAXIMUM OPERATING PRESSURE	6000.0 POUNDS PER SQUARE INCH"
CQJX	NOMINAL THREAD SIZE	1.062 INCHES 1ST END"
CQRB	SEAT ANGLE	37.0 DEGREES 1ST END"
CRDW	HYDROSTATIC TEST PRESSURE	12000.0 POUNDS PER SQUARE INCH"
CRWL	INSIDE SURFACE CONDITION	SMOOTH"
CRXX	MEASURING METHOD AND LENGTH	29.000 INCHES NOMINAL OVERALL"
FEAT	SPECIAL FEATURES	INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC"
MEDA	MEDIA FOR WHICH DESIGNED	FUEL/OIL, HYDROCARBON SINGLE RESPONSE"
THSD	THREAD SERIES DESIGNATOR	UN 1ST END"
AAGR	CROSS-SECTIONAL SHAPE STYLE	ROUND"
AAJD	THREAD CLASS	2B 1ST END"
AAJF	THREAD DIRECTION	RIGHT-HAND 1ST END"
AARX	INSIDE DIAMETER	0.750 INCHES NOMINAL"
ABJH	TEMP RATING	-40.0 DEG FAHRENHEIT AND 250.0 DEG FAHRENHEIT SINGLE RESPONSE"
ABKV	OUTSIDE DIAMETER	1.325 INCHES NOMINAL"
ACKH	MINIMUM INSIDE BENDING RADIUS	9.500 INCHES"
AHNC	CONNECTION STYLE	SWIVEL NUT FLARE 1ST END"
AKUU	END CONNECTION DESIGN	STRAIGHT 1ST END"
AKXL	END FITTING COMPONENT AND MATERIAL	COMPLETE FITTING STEEL ALL ENDS"
AWLS	CONNECTION TYPE	THREADED INTERNAL TUBE 1ST END"
CMLP	THREAD QUANTITY PER INCH	12 1ST END"
CQBD	BURST TEST PRESSURE	24000.0 POUNDS PER SQUARE INCH"
CQCS	LAYER COMPOSITION AND LOCATION	1ST LAYER BRAIDED STEEL WIRE"
CQCS	LAYER COMPOSITION AND LOCATION	2ND LAYER BRAIDED STEEL WIRE"
CQCS	LAYER COMPOSITION AND LOCATION	3RD LAYER BRAIDED STEEL WIRE"
CQCS	LAYER COMPOSITION AND LOCATION	4TH LAYER BRAIDED STEEL WIRE"
CQCS	LAYER COMPOSITION AND LOCATION	OUTER LAYER MOLDED RUBBER, SYNTHETIC"
CQGM	MAXIMUM OPERATING PRESSURE	6000.0 POUNDS PER SQUARE INCH"
CQJX	NOMINAL THREAD SIZE	1.062 INCHES 1ST END"
CQRB	SEAT ANGLE	37.0 DEGREES 1ST END"
CRDW	HYDROSTATIC TEST PRESSURE	12000.0 POUNDS PER SQUARE INCH"
CRWL	INSIDE SURFACE CONDITION	SMOOTH"
CRXX	MEASURING METHOD AND LENGTH	29.000 INCHES NOMINAL OVERALL"
FEAT	SPECIAL FEATURES	INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC"
MEDA	MEDIA FOR WHICH DESIGNED	FUEL/OIL, HYDROCARBON SINGLE RESPONSE"
THSD	THREAD SERIES DESIGNATOR	UN 1ST END"