MS20074-04-12 Manufactured by Carleton Life Support Technologies - Order Online

Part Number:  MS20074-04-12
Alternate P/N:  MS200740412
Item Name :  bolt machine
CAGE Code:  99251
FSC:  5306 Bolts
INC Code:  01847
Country:  USA
NCB Code:  00
FSG:  53 Hardware and Abrasives
The NSN Part MS20074-04-12 Bolt Machine is ready-to-ship today! Please request a quote by filling out the form. All fields are important. The NSN number for MS20074-04-12 is 5306-00-754-1785. The manufacturer of this part is Carleton Life Support Technologies. A dedicated customer service executive will contact you within 15 minutes of receiving the RFQ.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for MS20074-04-12

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/ . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

NSN Information for Part Number MS20074-04-12 with NSN 5306-00-754-1785, 5306007541785

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5306-00-754-1785

Item PartTypeName:

BOLT,MACHINE

53060075417850N
CIICHCCESDPMICCriticalityENAC
UU
Part NumberISCRNVCRNCCHCCMSDSSADC
MS20074-04-12222

Characteristics Data of NSN 5306-00-754-1785, 5306007541785

MRCCriteriaCharacteristic
AASKHEAD STYLEHEXAGON
CQHQMINIMUM YIELD STRENGTH2577 POUNDS PER SQUARE INCH
CRHCHOLE CONFIGURATION STYLEHEXAGON LONGITUDINAL HOLE
AAJDTHREAD CLASS3A
AAJFTHREAD DIRECTIONRIGHT-HAND
AASATHREAD LENGTH0.499 INCHES MINIMUM AND 0.578 INCHES MAXIMUM
AASBFASTENER LENGTH1.265 INCHES MINIMUM AND 1.312 INCHES MAXIMUM
AASUHEAD HEIGHT0.203 INCHES MINIMUM AND 0.234 INCHES MAXIMUM
AATBWIDTH BETWEEN FLATS0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM
AAUBHOLE DIAMETER0.070 INCHES NOMINAL
AHYMNOMINAL THREAD DIAMETER0.250 INCHES
ANEEGRIP LENGTH0.734 INCHES MINIMUM AND 0.766 INCHES MAXIMUM
ASXKHOLE QUANTITY6
BQDMHOLE TYPEDRILLED
CBBLFEATURES PROVIDEDFINISHED HEAD
CMLPTHREAD QUANTITY PER INCH20
CQBCMINIMUM TENSILE STRENGTH125000 POUNDS PER SQUARE INCH
CQFMHARDNESS RATING26.0 ROCKWELL C MINIMUM OVERALL AND 32.0 ROCKWELL C MAXIMUM OVERALL
MATTMATERIALSTEEL COMP 8740 OVERALL OR STEEL COMP 8630 OVERALL OR STEEL COMP 8735 OVERALL OR STEEL COMP 4037 OVERALL OR STEEL COMP 4130 OVERALL OR STEEL COMP 4140 OVERALL
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-6049 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-6050 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR MIL-S-6098 MIL SPEC 3RD MATERIAL RESPONSE OVERALL OR AMS 6300 ASSN STD 4TH MATERIAL RESPONSE OVERALL OR MIL-S-6758 MIL SPEC 5TH MATERI
SFTTSURFACE TREATMENTCADMIUM OVERALL
STDCSURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THSDTHREAD SERIES DESIGNATORUNC

bottom to top