AN44-C4 Manufactured by Aeronautical Standards Group - Order Online

Part Number:  AN44-C4
Alternate P/N:  AN44C4
Item Name :  bolt eye
CAGE Code:  88044
FSC:  5306 Bolts
INC Code:  01853
Country:  USA
NCB Code:  01
FSG:  53 Hardware and Abrasives
The NSN Part AN44-C4 Bolt Eye is ready-to-ship today! Please request a quote by filling out the form. All fields are important. The NSN number for AN44-C4 is 5306-01-230-3358. The manufacturer of this part is Aeronautical Standards Group. A dedicated customer service executive will contact you within 15 minutes of receiving the RFQ.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for AN44-C4

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/ . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

NSN Information for Part Number AN44-C4 with NSN 5306-01-230-3358, 5306012303358

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5306-01-230-3358

Item PartTypeName:

BOLT,EYE

53060123033580N
CIICHCCESDPMICCriticalityENAC
UA0
Part NumberISCRNVCRNCCHCCMSDSSADC
AN44-C4595

Characteristics Data of NSN 5306-01-230-3358, 5306012303358

MRCCriteriaCharacteristic
AAJDTHREAD CLASS3A
AAJFTHREAD DIRECTIONRIGHT-HAND
AASATHREAD LENGTH0.500 INCHES MINIMUM AND 0.579 INCHES MAXIMUM
AATKEYE INSIDE DIAMETER0.250 INCHES MINIMUM AND 0.253 INCHES MAXIMUM
AATPSHOULDER THICKNESS0.078 INCHES MINIMUM AND 0.110 INCHES MAXIMUM
AATRSHANK LENGTH0.578 INCHES MINIMUM AND 0.625 INCHES MAXIMUM
AAUAEYE STOCK THICKNESS0.183 INCHES MINIMUM AND 0.193 INCHES MAXIMUM
AAVHSHOULDER DIAMETER0.609 INCHES MINIMUM AND 0.641 INCHES MAXIMUM
AAWBSHANK UNTHREADED HOLE DIAMETER0.066 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE
ABHPOVERALL LENGTH1.484 INCHES NOMINAL
AHYMNOMINAL THREAD DIAMETER0.312 INCHES
CMLPTHREAD QUANTITY PER INCH24
CQBCMINIMUM TENSILE STRENGTH125000 POUNDS PER SQUARE INCH
CQFMHARDNESS RATING26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
CRHTDISTANCE FROM CENTER OF EYE TO SHANK END1.125 INCHES NOMINAL
CTWFDISTANCE FROM THREADED END TO SHANK HOLE CENTER0.405 INCHES MINIMUM AND 0.437 INCHES MAXIMUM FIRST HOLE
CWXMEYE OUTSIDE WIDTH0.609 INCHES MINIMUM AND 0.641 INCHES MAXIMUM
MATTMATERIALSTEEL COMP 431 OVERALL
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-18732 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
SFTTSURFACE TREATMENTPASSIVATE OVERALL
STYLSTYLE DESIGNATORROUND,CLOSED W/SHOULDER
THSDTHREAD SERIES DESIGNATORUNF

bottom to top